Technical Data Sheets are not substitutes for instruction
sheets from manufacturers. Always consult with individual
manufacturers for specific recommendations for their
products and always check applicable local regulations.
| Commercial
& Residential Garage Door Technical Data Sheets |
| 1. |
TDS
#151 - |
General Code Inspection
Guidelines for Garage Doors |
| 2. |
TDS
#152 - |
Garage Doors and Hurricanes |
| 3. |
TDS
#153 - |
Vertically Reinforced
Sectional Garage Doors |
| 4. |
TDS
#154 - |
DASMA Steel Gauge
Charts |
| 5. |
TDS
#155 - |
Residential and Commercial
Wind Load Guides |
| 6. |
TDS
#156 - |
Standard Wood Header
and Jamb Detail Guidelines |
| 7. |
TDS
#157 - |
Garage Doors and Foam
Plastic |
| 8. |
TDS
#158 - |
Glazing in Garage
Doors |
| 9. |
TDS
#159 - |
Garage Doors and Foam
Plastics Canadian Applications |
| 10. |
TDS
#160 - |
Sectional Garage Door
Terminology |
| 11. |
TDS
#161 - |
Connecting Garage
Door Jambs to Building Framing |
| 12. |
TDS
#162 - |
Wood Door Finishing
Guidelines |
| 13. |
TDS
#163 - |
Garage Door R-Value |
| 14. |
TDS
#164 - |
Drywall Surfaces and
the Mounting of Garage Door Hardware |
| 15. |
TDS
#165 - |
Garage Door Manual
Operation |
| 16. |
TDS
#166 - |
Guidelines For Connecting
A Drawbar Operator To A Sectional Garage Door |
| 17. |
TDS
#167 - |
Sectional Garage Door
& Electric Operator Checklist for Home Inspectors
and Consumers |
| 18. |
TDS
#168 - |
Wind Loads on Garage
Doors - FAQ |
| 19. |
TDS
#169 - |
Garage Door Certification
Program - Common Questions and Answers for Manufacturers
(Contact DASMA office if you desire a copy of this
TDS) |
| 20. |
TDS
#170 - |
DASMA Garage Door
Certification Program - Common Questions and Answers
Dealers/Contractors/Design Professionals/Code Officials/Consumers
(Contact DASMA office if you desire a copy of this
TDS) |
| 21. |
TDS
#171 - |
Official Color Codes
for Torsion and Extension Springs |
| 22. |
TDS
#172 - |
Garage Door Labels |
| 23. |
TDS
#173 - |
Garage Doors and Ventilation |
| 24. |
TDS
#174 - |
Post-High Wind Event
Door Operation by a Building Occupant |
| 25. |
TDS
#175 - |
Post-High Wind Event
Door Operation by a Trained Door Systems Technician. |
| 26. |
TDS
#176 - |
Adding Weight to a
Garage Door Assembly |
| 27. |
TDS
#177 - |
Application of Kd
Factor To Garage Door Wind Load Determination Using
ASCE 7 |
| 28. |
TDS
#179 - |
Wood Garage Door Inspection
and Maintenance Guidelines |
| Rolling
Door Technical Data Sheets |
| 1. |
TDS
#155 - |
Residential and Commercial
Wind Load Guides |
| 2. |
TDS
#251 - |
Architects and Designers
Should Understand Loads Exerted by Overhead Coiling
Doors |
| 3. |
TDS
#252 - |
Test Rolling Fire
Doors in the Fully Open Position ONLY |
| 4. |
TDS
#254 - |
Guidelines for Installation
of Rolling Steel Fire Door Release Assembly |
| 5. |
TDS
#255 - |
Guidelines for Fusible
Links |
| 6. |
TDS
#256 - |
Sensing Edges for
Rolling Doors (replaced by TDS-368, Sensing Edges) |
| 7. |
TDS
#257 - |
Procedure for Repair
of UL Classified Rolling Steel Type Fire Doors |
| 8. |
TDS
#258 - |
Rolling Steel Fire
Doors: Release Options |
| 9. |
TDS
#259 - |
Metal Rolling Type
Door Jamb Construction: Steel Reinforcement in Masonry
Walls |
| 10. |
TDS
#260 - |
Common Metal Coiling
Door Installation Problems |
| 11. |
TDS
#261 - |
Common Jamb Construction
for Rolling Steel Fire Doors: Masonry Construction
- Bolted and Welded Guides |
| 12. |
TDS
#262 - |
Common Jamb Construction
for Rolling Steel Fire Doors-Non Masonry Construction-Bolted
Guides |
| 13. |
TDS
#263 - |
Common Jamb Construction
for Rolling Steel Counter Fire Doors-Masonry Construction-Bolted
Guides |
| 14. |
TDS
#264 - |
Common Jamb Construction
for Rolling Steel Counter Fire Doors-Non Masonry
Construction-Bolted Guides |
| 15. |
TDS
#265 - |
Standard Rolling Door
Architectural Details |
| 16. |
TDS
#266 - |
Rolling Steel Fire
Door Protection for Fire Wall Openings |
| 17. |
TDS
#267 - |
Rolling Door Labels |
| 18. |
TDS
#268 - |
Rolling Doors Operated
by Roller Chains |
| 19. |
TDS
#269 - |
Rolling Door Performance
Evaluation |
| 20. |
TDS
#270 - |
Recommended Rolling
Door Maintenance Practices for Building Maintenance
Supervisors |
| 21. |
TDS
#271 - |
Rolling Steel Fire
Doors, Drop Testing and Annual Follow-Up |
| 22. |
TDS
#272 - |
Rolling Door Counterbalancing |
| 23. |
TDS
#273 - |
Rolling Steel Fire
Doors Mounted on Steel Tubes, Set Against Face of
Fire-Rated Walls, Bolted Guides |
| 24. |
TDS
#274 - |
Rolling Steel Door
Paint Wear |
| 25. |
TDS
#275 - |
Procedure for Repair
of FM Approved Rolling Steel Type Fire Doors |
| 26. |
TDS
#276 - |
Rolling Door "Red
Zone" For Installations and Service |
| 27. |
TDS
#277 - |
Metal Coiling Slat
Door Terminology |
| 28. |
TDS
#278 - |
Rolling Steel Fire
Doors and Balanced Fire Protection. |
| 29. |
TDS
#279 - |
Rolling Door Operation
Under Wind Load Conditions |
| 30. |
TDS
#282 - |
Rolling Doors and
Hurricanes |
| 31. |
TDS
#283 - |
Rolling Sheet Door
Terminology |
| 32. |
TDS
#284 - |
Rolling Door Winding
Bars |
| 33. |
TDS
#285 - |
Relocating an Existing
Rolling Steel Fire Door |
|
Operator & Electronics Technical Data Sheets
|
| 1. |
TDS
#351 - |
Federal and State
Garage Door Operator Legislation Guidelines for
Dealers and Installers |
| 2. |
TDS
#352 - |
Automatic Vehicular
Gate Operating Systems: Guidelines for Specifiers,
Designers, Dealers, Installers and End Users |
| 3. |
TDS
#353 - |
Gate Operators and
the UL 325 Standard |
| 4. |
TDS
#354 - |
Loop Systems and Depth
in Road Pavements |
| 5. |
TDS
#355 - |
Access Controlled
Egress Doors |
| 6. |
TDS
#356 - |
UL 325 and Gate Installations
Frequently Asked Questions |
| 7. |
TDS
#357 - |
Commercially Available
Non-Contact Photoelectric Sensors |
| 8. |
TDS
#358 - |
Gate Operators and
OSHA Requirements |
| 9. |
TDS
#359 - |
Gate Operators and
NEC Provisions |
| 10. |
TDS
#360 - |
Placement of Gate
Operator Controls |
| 11. |
TDS
#361 - |
Garage Doors Operated
in Tandem |
| 12. |
TDS
#362 - |
Garage Door Operator
Pre-Wiring Diagram |
| 13. |
TDS
#363 - |
Evaluation of Garage
Door Operators Employing Photoelectric Eyes |
| 14. |
TDS
#364 - |
Installation Height
of Photoelectric Sensors |
| 15. |
TDS
#365 - |
Dimensions to Consider
When Installing an Accessible Communications System |
| 16. |
TDS
#366 - |
Gate Operator Pre-Installation
and Site Planning |
| 17. |
TDS
#367 - |
Testing of External
Entrapment Protection Devices Used With Vehicular
Gate Operators |
| 18. |
TDS
#368 - |
Sensing Edges |
| 19. |
TDS
#369 - |
Frequently Asked Questions
Regarding Automated Garage Door Systems |
| 20. |
TDS
#370 - |
Rationale Behind the
Provisions of ASTM F 2200 & Illustration Guidelines
Based on the Provisions of ASTM 2200 (AFA Reference
#6-125A) (NOMMA Reference #325-003-2000) |
| 21. |
TDS
#371 - |
Automated Vehicular
Gate Systems: Checklist for Inspectors and Property
Owners |
| 22. |
TDS
#372 - |
Rationale Behind Development
of Provisions of DASMA 303 Performance Criteria
for Accessible Communications Entry Systems |
| 23. |
TDS
#373 - |
Automated Vehicular
Horizontal Slide & Swing Gates Installation
Checklist |
| 24. |
TDS
#374 - |
Land-Mobile-Radio
(LMR) System Frequency Interference With Garage
Door Openers Questions and Answers |
| 25. |
TDS
#375 - |
Motor Operated Commercial
Sectional Doors and Rolling Doors Electrical Service
Installation Recommendations |
| 26. |
TDS
#376 |
Automated Vehicular
Gate System Warning Signs / Placards |
DASMA continually develops Technical Data Sheets (TDS) to provide information on technical issues about DASMA products. Data sheets are designed to aid users, purchasers, installers, and specifiers of our products.